Compressors and compression units
Screw compressors
FRIMONT is a GEA distributor and integrator in Argentina, Chile, Uruguay, Paraguay and Bolivia. GEA compressors for industrial refrigeration, air conditioning and heat pumps.
GEA screw compressors combine energy efficiency, reliability and safety with a design that simplifies maintenance. Open and semi-hermetic options are selected according to refrigerant, capacity and operating conditions.
- Industrial refrigeration and air conditioning.
- Ammonia heat pumps.
- High-pressure gas compression with Grasso L XHP.
Source: GEA Group · YouTube
Packaged in our own plant
Compressor units
We build compressor units with a GEA compressor and FRIMONT FCX control: a rugged industrial design made for simple maintenance.
- Motor and compressor mounted low on high-power units, with direct access for maintenance.
- Low-volume oil separator: about 60 litres on an 800 hp unit.
- Oil carry-over below 3 ppm, for minimal oil consumption.
- Safe oil charging, with no need to pull a vacuum.
- Large-capacity dual oil filters with easy access.
- Bearings replaced on site.
- Remote supervision and control with FCX.

Hover over the index to see each view. Click to keep it on screen.
Configurations
A configuration tailored to your application.
Technical selection defines the equipment and its integration with the process.

GEA M
GEA Grasso M compressors are the first screw compressors with an integrated pressure-activated check valve ensuring low pressure drop.
The integration of the suction filter and coupling housing greatly simplifies assembly of the package. The outstanding energy efficiency of these compressors is based on the infinitely adjustable capacity combined with the extended variable Vi range (internal volume ratio). The variable speed from 1,000 to 6,000 rpm ensures a wide operating range and maximum efficiency at full and part load.
Highlights and technical specifications
- Outstanding energy efficiency
- Easy package assembly
- Designed for ammonia (R717) and all other common refrigerants
- Available according to API 619 and ISO 10440 standards
- Swept volume: 231 – 870 m³/h / 136 to 512 cfm at 2,940 rpm
- Speed range: 1,000 – 6,000 rpm
- Design pressure: 28 bar, 52 bar / 406 psi, 754 psi
| Model | Swept volume (m³/h) | Max. design pressure (bar) | Dimensions (mm) | Suction DN (mm) | Discharge DN (mm) | Weight (kg) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2,940 rpm | 3,550 rpm | 4,500 rpm | Length | Width | Height | |||||
| C | 231 | 279 | 354 | 28 | 852 | 660 | 660 | 80 | 65/80 | 392 |
| D | 265 | 320 | 406 | 28 | 882 | 660 | 660 | 80 | 65/80 | 401 |
| E | 321 | 388 | 491 | 28 | 898 | 660 | 667 | 80 | 80 | 444 |
| G | 372 | 449 | 569 | 28 | 927 | 660 | 667 | 80 | 80 | 451 |
| H | 471 | 569 | 721 | 28 / 52 | 964 | 800 | 820 | 125 | 80 | 581 |
| L | 544 | 657 | 833 | 28 / 52 | 1,000 | 800 | 820 | 125 | 80 | 605 |
| M | 708 | 855 | 1,084 | 28 / 52 | 1,094 | 800 | 856 | 150 | 100 | 772 |
| N | 870 | 1,051 | 1,332 | 28 / 52 | 1,145 | 800 | 820 | 150 | 100 | 800 |
| Model | 28 bar compressor | 52 bar compressor | ||
|---|---|---|---|---|
| Cooling R717 −35/+35 °C* | Cooling R717 0/+35 °C | Cooling R744 −50/−5 °C | Heating R717 +35/+80 °C | |
| C | To be announced by GEA | |||
| D | To be announced by GEA | |||
| E | To be announced by GEA | |||
| G | To be announced by GEA | |||
| H | 115 | 444 | 486 | 1,258 |
| L | 133 | 513 | 562 | 1,457 |
| M | 174 | 673 | 743 | 2,202 |
| N | 215 | 828 | 914 | 2,474 |
At 2,940 rpm with 5 K superheat and 0 K subcooling. Evaporation/condensation temperatures. *With economizer.
GEA data, subject to change. We help you select the model for your operating point.

GEA LT
The GEA Grasso LT series offers sixteen sizes with swept volumes ranging from 805 to 11,467 m³/h (at 2,940 rpm).
The compressor offers a long service life, low vibration and quiet operation thanks to the combination of sleeve and roller bearings on the rotors. All components are designed for long-lasting operation, high availability and easy maintenance. GEA screw compressors can be supplied in accordance with API 619 and ISO 10440 standards.
Highlights and technical specifications
- Very long product service life
- Excellent noise and vibration levels under all operating conditions
- Designed for R717 (ammonia) and all other common refrigerants
- Available in accordance with API 619 and ISO 10440 standards
- Swept volume range: 805 to 11,467 m³/h at 2,940 rpm
- Speed range: 1,500 to 3,600 rpm (types P and V to XH); 1,500 to 4,500 rpm (types R, S and T)
- Design pressure: 28 bar, 52 bar
| Model | Swept volume (m³/h) | Max. design pressure (bar) | Dimensions (mm) | Suction DN (mm) | Discharge DN (mm) | Weight (kg) | |||
|---|---|---|---|---|---|---|---|---|---|
| 2,940 rpm | 3,550 rpm | Length | Width | Height | |||||
| P | 805 | 972 | 28 / 52 | 817 | 600 | 525 | 150 | 100 | 595 |
| R | 1,040 | 1,256 | 28 / 52 | 965 | 660 | 570 | 175 | 100 | 895 |
| S | 1,290 | 1,558 | 28 / 52 | 1,032 | 660 | 570 | 175 | 100 | 960 |
| T | 1,460 | 1,763 | 28 / 52 | 1,125 | 660 | 570 | 175 | 100 | 1,060 |
| V | 1,740 | 2,101 | 28 / 52 | 1,040 | 750 | 670 | 250 | 150 | 1,186 |
| W | 1,990 | 2,403 | 28 / 52 | 1,145 | 750 | 670 | 250 | 150 | 1,200 |
| Y | 2,390 | 2,886 | 28 / 52 | 1,161 | 750 | 670 | 250 | 150 | 1,308 |
| Z | 2,748 | 3,318 | 28 / 52 | 1,315 | 760 | 700 | 250 | 150 | 1,670 |
| XA | 3,250 | 3,924 | 28 / 52 | 1,425 | 760 | 700 | 250 | 150 | 1,740 |
| XB | 4,150 | 5,011 | 28 / 52 | 1,410 | 900 | 850 | 300 | 200 | 2,100 |
| XC | 4,900 | 5,917 | 28 / 52 | 1,480 | 900 | 850 | 300 | 200 | 2,400 |
| XD | 5,800 | 7,003 | 28 / 52 | 1,560 | 900 | 850 | 300 | 200 | 2,600 |
| XE | 7,110 | 8,585 | 28 / 52 | 1,625 | 980 | 980 | 400 | 250 | 3,500 |
| XF | 8,560 | 10,336 | 28 | 1,725 | 980 | 980 | 400 | 250 | 3,850 |
| XG | 9,807 | 11,842 | 28 | 2,180 | 1,100 | 1,140 | 457 | 305 | 4,500 |
| XH | 11,467 | 13,846 | 28 | 2,300 | 1,100 | 1,140 | 457 | 305 | 4,700 |
| Model | 28 bar compressor | 52 bar compressor | ||
|---|---|---|---|---|
| Cooling R717 −35/+35 °C* | Cooling R717 0/+35 °C | Cooling R744 −50/−5 °C | Heating R717 +35/+80 °C | |
| P | 201 | 772 | 851 | 2,679 |
| R | 260 | 997 | 1,099 | 3,433 |
| S | 328 | 1,261 | 1,418 | 4,318 |
| T | 368 | 1,413 | 1,599 | 4,814 |
| V | 443 | 1,690 | 1,868 | 5,780 |
| W | 506 | 1,932 | 2,135 | 6,631 |
| Y | 614 | 2,344 | 2,591 | 7,990 |
| Z | 714 | 2,713 | 3,040 | 9,188 |
| XA | 844 | 3,209 | 3,595 | 10,853 |
| XB | 1,070 | 4,070 | 4,499 | – |
| XC | 1,260 | 4,807 | 5,366 | – |
| XD | 1,491 | 5,689 | 6,351 | – |
| XE | 1,842 | 7,030 | – | – |
| XF | 2,200 | 8,393 | – | – |
| XG | 2,520 | 9,615 | – | – |
| XH | 2,946 | 11,244 | – | – |
At 2,940 rpm with 5 K superheat and 0 K subcooling. Evaporation/condensation temperatures. *With economizer.
GEA data, subject to change. We help you select the model for your operating point.

GEA CompaX
Simplifying the use of NH₃. GEA aims to increase the attractiveness and awareness of the natural refrigerant ammonia and to ease the use of ammonia-based solutions. For this purpose, it developed the semi-hermetic screw compressor CompaX.
The GEA CompaX operates without a shaft seal and reduces leakage risk to a minimum. Thanks to its low vibration and sound level, the compressor is ideal for use close to populated areas. In addition, it builds on more than 50 years of screw compressor development, opening new possibilities for sophisticated refrigeration systems with ammonia, one of the most efficient refrigerants.
The two GEA CompaX models, 350 and 400, have a flow volume of 321 and 372 m³/h (at 2,940 rpm). With speeds of up to 6,000 rpm and the possibility of a multi-compressor arrangement, these two sizes suit small, medium and larger capacity requirements. They combine the high efficiency of the natural refrigerant ammonia, a wide, steplessly adjustable variable internal volume ratio and a wide speed range with the safety and reliability of decades of experience in screw compressors. The compact design and high degree of integration also make the GEA CompaX a cost-efficient, space-saving product.
The semi-hermetic GEA CompaX range offers highly efficient, reliable and low-maintenance solutions for many cooling applications.
| Model | Swept volume (m³/h) · 2,940 rpm |
|---|---|
| CompaX 350 | 321 |
| CompaX 400 | 372 |
GEA data, subject to change. We help you select the model for your operating point.

GEA L XHP
Innovative high-pressure screw compressor. To ensure that the L XHP delivers the efficiency and reliability expected of a sustainable solution, GEA engineered an innovative new rotor profile. Combined with the extremely robust design and new balance piston concept, it makes the GEA Grasso L XHP the best high-pressure screw compressor GEA has ever created. It is perfect for ammonia heat pumps and high-pressure gas applications.
Highlights and technical specifications
- New design optimized for NH₃ heat pumps and high-pressure gas applications
- Engineered for a long service life and easy maintenance
- Suitable for a wide range of applications
- Variable Vi
- Max. condensation temperature of 95 °C / 203 °F
- Compressor design pressure of 70 bar / 1,016 psi (g)
- Available in three sizes: 1,990 m³/h to 2,748 m³/h / 1,172 to 1,617 cfm at 2,940 rpm
- Max. speed of 3,600 rpm
- Max. discharge temperature of 140 °C / 284 °F
Source: GEA Group
Source: GEA Group
| Model | Swept volume (m³/h) | Heating capacity (kW) | ||
|---|---|---|---|---|
| 2,940 rpm | 3,550 rpm | R717 0 → 75 °C | R717 35 → 95 °C | |
| H2000 | 1,990 | 2,403 | 2,250 | 5,350 |
| H2400 | 2,390 | 2,886 | 2,700 | 6,500 |
| H2800 | 2,748 | 3,318 | 3,150 | 7,550 |
GEA data, subject to change. We help you select the model for your operating point.

GEA for gas
GEA offers a range of screw compressors optimized for compressing natural and industrial gases. They are key system components in oil and gas extraction and processing, in power plants with gas turbines, in chemical processing and in many other industries.
They are designed for long operating life and high availability, and can be supplied in accordance with various standards, such as API 619 and other international standards. Because screw compressors do not generate out-of-balance forces, they require significantly lighter foundations.
Highlights and technical features
- Gases: natural gas, biogas, process gas, synthetic gas and mixed gas
- Swept volume: 231 to 13,846 m³/h
- Design pressure: 28 bar or 52 bar; others on request
- Applications: natural gas extraction and storage, flare gas recovery, landfill and power plants
- Design standards: API 619, ATEX, ISO 10440, UL, Germanischer Lloyd and Bureau Veritas; others on request
- Speed: 1,000 to 6,000 rpm (GEA Grasso M, types C, D, E and G); 1,000 to 4,500 rpm (GEA Grasso M, types H, L, M and N); 1,450 to 3,600 rpm (GEA Grasso LT)
- Outstanding energy efficiency, extremely long operating life, high availability and easy maintenance
| Series | Model | Swept volume (m³/h) | Max. design pressure (bar) | Weight (kg) | ||
|---|---|---|---|---|---|---|
| 2,940 rpm | 3,550 rpm | 4,500 rpm | ||||
| GEA Grasso M | C | 231 | 279 | 354 | 28 | 392* |
| GEA Grasso M | D | 265 | 320 | 406 | 28 | 401* |
| GEA Grasso M | E | 321 | 388 | 491 | 28 | 444* |
| GEA Grasso M | G | 372 | 449 | 569 | 28 | 451* |
| GEA Grasso M | H | 471 | 569 | 721 | 28 / 52 | 581* |
| GEA Grasso M | L | 544 | 657 | 833 | 28 / 52 | 605* |
| GEA Grasso M | M | 708 | 855 | 1,084 | 28 / 52 | 772* |
| GEA Grasso M | N | 870 | 1,051 | 1,332 | 28 / 52 | 800* |
| GEA Grasso LT | P | 805 | 972 | – | 28 / 52 | 595 |
| GEA Grasso LT | R | 1,040 | 1,256 | – | 28 / 52 | 895 |
| GEA Grasso LT | S | 1,290 | 1,558 | – | 28 / 52 | 960 |
| GEA Grasso LT | T | 1,460 | 1,763 | – | 28 / 52 | 1,060 |
| GEA Grasso LT | V | 1,740 | 2,101 | – | 28 / 52 | 1,186 |
| GEA Grasso LT | W | 1,990 | 2,403 | – | 28 / 52 | 1,200 |
| GEA Grasso LT | Y | 2,390 | 2,886 | – | 28 / 52 | 1,308 |
| GEA Grasso LT | Z | 2,748 | 3,318 | – | 28 / 52 | 1,670 |
| GEA Grasso LT | XA | 3,250 | 3,924 | – | 28 / 52 | 1,740 |
| GEA Grasso LT | XB | 4,150 | 5,011 | – | 28 / 52 | 2,100 |
| GEA Grasso LT | XC | 4,900 | 5,917 | – | 28 / 52 | 2,400 |
| GEA Grasso LT | XD | 5,800 | 7,003 | – | 28 / 52 | 2,600 |
| GEA Grasso LT | XE | 7,110 | 8,585 | – | 28 / 52 | 3,500 |
| GEA Grasso LT | XF | 8,560 | 10,336 | – | 28 | 3,850 |
| GEA Grasso LT | XG | 9,807 | 11,842 | – | 28 | 4,500 |
| GEA Grasso LT | XH | 11,467 | 13,846 | – | 28 | 4,700 |
*For GEA Grasso M, weight includes the coupling housing.
GEA data, subject to change. We help you select the model for your operating point.
GEA gas compressor brochure, PDF (opens in a new tab)Selection
How we define the solution for your process.
We start from what you need to achieve and your facility conditions. We guide you through defining requirements and selecting an appropriate configuration. You do not need to have all this data to start the conversation.
What we evaluate during technical definition
- Operating point
- Refrigerant and suction and discharge conditions.
- Control and integration
- Demand variation, oil management, drive, and control system.
Documentation
Technical documentation.
Browse reference brochures for each series. To select equipment, request the configuration and specifications for your project.
Engineering and integration
Scope is defined with you.
From equipment selection to integration, installation, and commissioning, we agree on what the project needs and how it connects to your facility. Control systems and after-sales service are integral parts of that conversation.
What we can undertake



