Skip to main content
FRIMONT SA, home
← All products

Compressors and compression units

Reciprocating compressors

FRIMONT is a GEA distributor and integrator in Argentina, Chile, Uruguay, Paraguay and Bolivia. Reciprocating compression for refrigeration circuits and specific applications.

GEA Grasso V reciprocating compressors

Source: GEA Group · YouTube

Configurations

A configuration tailored to your application.

Technical selection defines the equipment and its integration with the process.

GEA Grasso V

GEA Grasso V

Focused on energy efficiency, minimal maintenance costs and more capacity for the same investment, second-generation GEA Grasso V reciprocating compressors lower the total cost of ownership in industrial refrigeration.

They are the standard in many industrial applications, such as food, dairy and beverage processing, storage and distribution, and data centers.

Highlights and technical features

  • Swept volume: 290 to 1,593 m³/h, variable speed up to 1,500 rpm
  • 4, 6, 8 or 10 cylinders for single-stage or two-stage operation
  • Up to 25% lower maintenance costs and up to 25% more capacity for the same investment
  • Designed for ammonia, a natural refrigerant: zero ODP and zero GWP
  • Unique welded compressor housing for excellent temperature separation
  • Extended, flexible maintenance intervals with real-time measurement (up to 22,500 hours)
  • Low noise and a wide speed and capacity control range
NH₃ · Freezing, 25 bar · Single stage
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveCooling capacity (kW)
−10/+35 °C0/+40 °C
V 300-22904500–1,500Direct or V-belt155237
V 450-24356500–1,500Direct or V-belt233358
V 600-25808500–1,500Direct or V-belt312478
V 700-26374500–1,200Direct or V-belt363543
V 1100-29556500–1,200Direct or V-belt550822
V 1400-21,2748500–1,200Direct or V-belt7341,096
V 1800-21,59310500–1,200Direct or V-belt9171,372

Theoretical swept volume at the maximum speed in the table.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

NH₃ · Freezing, 25 bar · Two stage
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveCooling capacity (kW)
−35/+35 °C−40/+35 °C
V 300T-22183/1500–1,500Direct or V-belt4534
V 450T-22904/2500–1,500Direct or V-belt6752
V 600T-24356/2500–1,500Direct or V-belt9068
V 700T-24783/1500–1,200Direct or V-belt10582
V 1100T-26374/2500–1,200Direct or V-belt151117
V 1400T-29556/2500–1,200Direct or V-belt211164
V 1800T-21,1147/3500–1,200Direct or V-belt259201

Theoretical swept volume at the maximum speed in the table.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

GEA data, subject to change. We help you select the model for your operating point.

GEA reciprocating compressor brochure, PDF (opens in a new tab)
GEA Grasso V HS

GEA Grasso V HS

Industrial reciprocating compressors designed to reduce total cost of ownership (TCO) through low energy consumption, reduced maintenance and high reliability.

The high-speed version delivers up to 25% more refrigeration capacity with the same models. For a fixed capacity requirement, this allows a smaller compressor, reducing investment and footprint. At lower speeds, it retains the efficiency benefits of the Grasso V series.

Highlights and technical features

  • Swept volume: 348 to 1,992 m³/h, variable speed up to 1,800 rpm
  • 4, 6, 8 or 10 cylinders for single-stage or two-stage operation
  • More capacity with lower investment and a smaller footprint
  • Designed for ammonia, a natural refrigerant: zero ODP and zero GWP
  • Extended, flexible maintenance intervals with real-time measurement (up to 22,500 hours)
  • Bearings and suction and discharge valves designed for a long service life
NH₃ · Freezing, 25 bar · Single stage
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveCooling capacity (kW)
−10/+35 °C0/+40 °C
V 300-2 HS3484500–1,800Direct186284
V 450-2 HS5226500–1,800Direct279429
V 600-2 HS6968500–1,800Direct374573
V 700-2 HS7964500–1,500Direct451675
V 1100-2 HS1,1936500–1,500Direct6871,026
V 1400-2 HS1,5928500–1,500Direct9151,386
V 1800-2 HS1,99210500–1,500Direct1,1441,711

Theoretical swept volume at the maximum speed in the table.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

NH₃ · Freezing, 25 bar · Two stage
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveCooling capacity (kW)
−35/+35 °C−40/+35 °C
V 300T-2 HS2623/1500–1,800Direct5440
V 450T-2 HS3484/2500–1,800Direct8062
V 600T-2 HS5226/2500–1,800Direct10881
V 700T-2 HS5983/1500–1,500Direct131102
V 1100T-2 HS7964/2500–1,500Direct188146
V 1400T-2 HS1,1946/2500–1,500Direct263205
V 1800T-2 HS1,3957/3500–1,500Direct323251

Theoretical swept volume at the maximum speed in the table.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

GEA data, subject to change. We help you select the model for your operating point.

GEA reciprocating compressor brochure, PDF (opens in a new tab)
GEA Grasso V XHP

GEA Grasso V XHP

Reciprocating compressors for heat pumps using ammonia, a natural refrigerant. They reach water temperatures up to 95 °C with best-in-class efficiency and a low total cost of ownership.

They cover heating capacities of approximately 700 to 2,300 kW with a design pressure of 63 bar(g).

Highlights and technical features

  • Models: V 350, V 550, V 750 and V 950 XHP, 4 to 10 cylinders
  • Heating capacity at 35/95 °C: approx. 700 to 2,300 kW
  • Swept volume at full load (1,500 rpm): 376 to 941 m³/h
  • Speed: 500 to 1,500 rpm, direct drive
  • Discharge design pressure: 63 bar(g); condensing temperature up to 95 °C
  • Efficiency and capacities according to EN 12900 and EN 13771
  • Low oil carry-over, no cylinder head cooling and low noise
  • Controlled by the GEA Omni panel
Models
ModelCylinders
V 350 XHP4
V 550 XHP6
V 750 XHP8
V 950 XHP10

GEA data, subject to change. We help you select the model for your operating point.

GEA reciprocating compressor brochure, PDF (opens in a new tab)
GEA Grasso 5HP

GEA Grasso 5HP

50 bar reciprocating compressors for CO₂ cascade freezing and for ammonia heat pumps. They achieve high performance thanks to a very low volume flow relative to the refrigeration capacity.

Four single-stage models with 3 to 6 cylinders cover a wide range of capacities. In NH₃ heat pumps they allow condensing up to 80 °C.

Highlights and technical features

  • Design pressure: 50 bar, with a pressure difference of up to 30 bar
  • Compact nodular cast iron housing
  • Heavy-duty axial roller bearing and gas-tight shaft seal
  • Safety valve independent of back pressure
  • Capacity control per cylinder and speed control from 500 to 1,500 rpm
CO₂ · Freezing, 50 bar
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveCooling capacity (kW)
−50/0 °C−40/−10 °C
35HP1013500–1,500Direct85161
45HP1354500–1,500Direct113215
55HP1685500–1,500Direct141268
65HP2026500–1,500Direct169320

Theoretical swept volume at the maximum speed in the table.

Variable speed drive only.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

NH₃ · Heat pumps, 50 bar
ModelSwept volume (m³/h)CylindersSpeed (rpm)DriveHeating capacity (kW)
35/80 °C30/70 °C
35HP1013500–1,500Direct265242
45HP1354500–1,500Direct353321
55HP1685500–1,500Direct441402
65HP2026500–1,500Direct529481

Theoretical swept volume at the maximum speed in the table.

Variable speed drive only.

Capacity of a package with 2 K non-useful superheat and 0 K subcooling; two-stage with an open flash intercooler.

Dimensions and weight
ModelDimensions (mm)Weight (kg)
LengthWidthHeight
35HP883861718552
45HP883861718552
55HP919943768633
65HP919943768633

GEA data, subject to change. We help you select the model for your operating point.

GEA reciprocating compressor brochure, PDF (opens in a new tab)

Selection

How we define the solution for your process.

We start from what you need to achieve and your facility conditions. We guide you through defining requirements and selecting an appropriate configuration. You do not need to have all this data to start the conversation.

What we evaluate during technical definition
Fluid and regime
Refrigerant or gas identification and compression conditions.
Existing equipment
Model, drive, connections, and mounting constraints in case of replacement.

Documentation

Technical documentation.

Browse reference brochures for each series. To select equipment, request the configuration and specifications for your project.

Request technical documentation

Engineering and integration

Scope is defined with you.

From equipment selection to integration, installation, and commissioning, we agree on what the project needs and how it connects to your facility. Control systems and after-sales service are integral parts of that conversation.

What we can undertake
Chat on WhatsApp